GB-BIOCIDE is an excellent biocide designed to control the growth of bacteria and algae in recirculating cooling water systems.
Benefits
GB-BIOCIDE combines rapid antimicrobial activity with an optimum degradation profile.
GB-BIOCIDE is effective in preventing the growth of gram-positive and gram negative bacteria, moulds, yeasts and algae.
Directions for use
Initial dosage with heavy algae slime. Add 500 ml per 1000 litre of water. Allow the algae to agglomerate, then clean out the water. After cleaning, replenish with clean water and dose at 20 - 100 ml per 1000 litre every alternate day depending on the severity of the micro biological problems and the relative amount of bleed-off.
Initial dosage with no visible sign of algae Add 250 ml per 1000 litre of water. Then maintain the system by adding 20-100 ml per 1000 litre every alternate day depending on the severity of the micro-biological problems and the relative amount of bleed-off.
Safety Precautions
This product is a biocide and should be handled with care. Avoid contact with the skin and eyes.
If contacted in the eyes, flush thoroughly with clean water for 15 minutes and seek medical attention. If skin contact occurs, remove contaminated clothing and wash skin thoroughly with clean water.
If swallowed, DO NOT induce vomiting, give a glass of milk or water and seek URGENT medical attention.
