GB-895 C is an excellent corrosion inhibitor for steel, cast iron, aluminium, copper and copper alloys found in circulating water systems.
Benefits
GB-895 C contains no heavy metals and is effective in protecting against calcium phosphate scaling.
GB-895 C greatly minimises the accumulation of silt without the need for separate dispersant treatment.
GB-895 C can be use either manually or with a chemical dosing pump.
Directions for use
Initial dosage to build up a protective film on the metal surfaces.
Add 500 ml of GB-895 C per 1000 litre capacity of the system. Maintain the level of GB-895 C at a minimum of 250 ppm. for 1 week. Allow the level of inhibitor to fall to the normal operating level of 100-150 ppm. These values should be maintained by further additions of the inhibitor.
The degree of protection decreases at levels below 60 ppm. and care should be exercised to ensure that the treatment is at all times higher than this minimum safety figure.
Safety Precautions
This product is a strong oxidizing agent and should be handled with care. Avoid contact with the skin and eyes.
If contacted in the eyes, flush thoroughly with clean water for 15 minutes and seek medical attention.
If skin contact occurs, remove contaminated clothing and wash skin thoroughly with clean water.
If swallowed, DO NOT induce vomiting, give a glass of milk or water and seek URGENT medical attention.
