GB- 52 S is a safety solvent cleaner with a high flash point. It is designed for cleaning of electrical motor and other components where the use of water is undesirable or hazardous.
Benefits
GB-52 S is fast drying and has a high flash point therefore reducing fire-risk associated with other low flash point solvent cleaner.
GB-52 S is safe on all metals, readily removes oil, grease and dirt effectively and is fast drying. It will not attack durable insulating materials.
GB-52 S is ready to use at room temperature and simple to apply with non-atomising spray, brush or immersion.
Directions for use
Spray Method Spray GB-52 S onto the surface in an area with adequate ventilation. The spray must be non-atomising.
Tank Method GB-52 S is used at room temperature in a mild steel tank with a lid to prevent evaporation. Immerse components for 10-20 minutes, then remove from tank and allow to air dry.
Brush Method Use a brush to apply GB-52 S onto the surface to be cleaned. Apply direct a few times depending on the type and amount of soils and then allow to air dry.
Safety Precautions
This product is solvent based and should be handled with care. Avoid contact with the skin and eyes.
If contacted with the eyes, flush thoroughly with clean water for 15 minutes and seek medical attention. If skin contact occurs, remove contaminated clothing and wash skin thoroughly with clean water.
If swallowed, DO NOT induce vomiting, give a glass of milk or water and seek URGENT medical attention.
